Mainboard PM945GC
9
Back Panel Configuration
PS/2 Mouse & PS/2 Keyboard Ports: KB/MS
This mainboard provides a standard PS/2 mouse port and a PS/2 keyboard port.
Serial and Parallel Interface Ports
The mainboard provides one serial port and one parallel port on the back panel.
Parallel Interface Port: PARALLEL
The parallel port on your mainboard is a standard 25-pin one, and is used to connect a parallel printer.
The Serial Interface: COM1
This mainboard provides a serial port COM1 on your back panel, and is used to connect mice, modem
and other peripheral devices. Through this port, you can also transfer data from your computer hard disk
drive to other computers.
The VGA (D-SUB) Connector: VGA
The mainboard provides one VGA connector (= D-Sub connector) on back panel.
VGA connector (= D-Sub connector) delivers the analogy signals, and is able to connect with traditional
CRT display, flat display, or other display device which with the D-Sub interface compatible.
USB Ports/LAN Port: USB1, USB/LAN
There are four onboard USB 2.0/ 1.1 ports on the back panel. These USB ports are used to attach with
USB devices, such as keyboard, mice and other USB supported devices. There is also a 10/100 Mbps
Ethernet LAN port available for you to attach an Internet cable.