PM266A PRO/ PM266A
44
PM266A PRO/ PM266A
44
Problem 4:
System only boots from the CD-ROM. The hard disk can be read and applic
isk is impossible.
ations can be used but
FOUND” displays and the system does not allow certain data
intrusion or disk failure.
ack up any salvageable data. Then performs low level format, partition, and then a high
when completed.
auses: Incorrect information entered into the BIOS setup program.
system’s equipment. Reconfigure the system.
power to monitor.
e power connectors to the monitor and to the system.
m 8:
e sure that all memory modules are securely installed.
n viruses.
P
S
booting from the hard d
Causes: Hard Disk boot sector has been corrupted.
Solutions: Back up data and applications files. Reformat the hard drive. Re-install applications and
acku disks.
data using b
p
Problem 5:
Error message reading “SECTOR NOT
to be accessed.
Causes: There are many reasons for this such as virus
Solutions: B
level format the hard drive. Re-install all saved data
Problem 6:
Screen message says “Invalid Configuration” or “CMOS Failure.”
C
Solutions: Review
Problem 7:
The Screen is blank.
Causes: No
Solutions: Check th
P
B
roble
lank screen.
Causes:
1. Memory problem.
2. Computer virus.
Solutions:
1. Reboot computer. Reinstall memory. Mak
2. Use anti-virus programs to detect and clea
roblem 9:
Screen goes blank periodically.
Causes: Screen saver is enabled.
olutions: Disable screen saver.
