Mainboard KM7025
9
4. Repeat steps 1, 2 & 3 for the remaining RAM modules.
Back Panel Configuration
PS/2 Mouse & PS/2 Keyboard Ports: KB/MS
This mainboard provides a standard PS/2 mouse port and a PS/2 keyboard port. The pin
assignments are described below.
DVI & VGA (D-SUB) Connectors: DVI, VGA
The mainboard provides one DVI connector and one VGA connector (= D-Sub connector) on
the case back panel.
DVI connector delivers the digital signals, and is able to connect with LCD display, plasma
display, or other display device which with the DVI interface compatible.
VGA connector (= D-Sub connector) delivers the analogy signals, and is able to connect with
traditional CRT display, flat display, or other display device which with the D-Sub interface
compatible.
USB Ports/LAN Port: USB1, USBLAN2
There are four onboard USB 2.0/ 1.1 ports on the back panel. These USB ports are used to
attach with USB devices, such as keyboard, mice and other USB supported devices. There is
also one 10/100 Mbps Ethernet LAN port available for you to attach an Internet cable.
＊
The pictures above are for reference only. Your actual
installation may vary slightly from the pictures.
