KM400T-8X Series
26
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
Options: 6 (default)
、
8
、
10
、
12
、
15
、
20
、
24
、
30
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)
、
500
、
750
、
1000
APIC Mode
By enabling this option, “MPS version control for OS” can be configured.
Options: Disabled
、
Enabled (default)
MPS Version Control For OS
The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment.
Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)
、
1.1
OS Select For DRAM > 64MB
Select “OS2” only if you are running the OS/2 operating system with greater than 64 MB of RAM.
Options: Non-OS2 (default)
、
OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)
、
Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)
、
Enabled
Advanced Chipset Features
DRAM Clock/ Drive Control
Press <Enter> to enter next page for DRAM Clock/ Drive Control settings.
DRAM CAS Latency Time
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock
cycles of CAS latency depends on the DRAM timing. Do not reset this field from the default value
specified by the system designer. Options: 1.5
、
2
、
2.5 (default)
、
3
