Mainboard KI51PV-754
26
Options: Auto, 2T, 3T (Default), 4T, 5T, 6T, 7T
Row precharge Time (Trp)
You can set the Row precharge time. Precharge to Active or Auto-Refresh of the same bank.
Options: Auto, 2T, 3T (Default), 4T, 5T, 6T, 7T
1T/2T Memory Timing
Use this option to select the memory timing. Options: 1T, 2T (Default)
Frame Buffer Size
This option allows you to set for pure DOS mode of using. You can set the amount of value to
share main memory. Options: 32M, 64M (Default), 128M, Disabled
RGB/TV Display
This option allows you to set for display shade mode of using. Options: Auto (Default), RGB, TV
TV Mode Support
This option allows you to set the TV mode regarding your country formulated.
Options: NTSC-M, NTSC-J, PAL-M, PAL-BDGHI, PAL-N, PAL-NC, Disabled (Default)
System BIOS Cacheable
When enabled, accesses to system BIOS ROM addressed at F0000H-FFFFFH are cached,
provided that the cache controller is enabled. Options: Enabled, Disabled (Default)
PnP/PCI Configurations
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller
and map it to their display as a way to provide boot information and VGA compatibility.
Options: Disabled (Default), Enabled
PCI Latency Timer (CLK)
This option allows you to set up the PCI Latency Time (0-255). If you select “32” it will optimize
PCI speeds. Options: 0-255, 32 (Default)
**PCI Express relative items**
Maximum Payload Size
This item allows you to set the PCI-Express maximum payload size per time.
Options: 128, 256, 512, 1024, 2048, 4096(Default)
Frequency/Voltage Control
