K8M800-754
8
Please refer the table below to setup the memory:
mory
Bank
184-pin DDR DIMM
PCS
Total Me
Bank 0,
IMM1) DDR26
SDRAM
1 (D
6/DDR333/DDR400
DDR
Module
X1 64MB
∼
1.0GB
Bank 2, 3 (DIMM2) DDR266/DDR333/DDR400
DDR
SDRAM Module
X1 64MB
∼
1.0GB
Total
System Memory (Max. 2.0GB)
X2
64MB
∼
2.0GB
Mem
Modu
installation for this mainboard:
e sure that the power supply is
UNPLUGGED
.
Match th
e DIMM slot. This
will ensure
.
Lower the m
thumbs until the
.
Repeat step 1, 2 & 3 for the remaining memory modules.
ory
le Installation
The following in
explain memory module
1.
Before install your memory module, please mak
structions
Pull the white plastic tabs at both ends of the slot away from the slot.
2.
e notch on the memory module with the corresponding pattern in th
that the module will be inserted with the proper orientation.
3
emory module into the DIMM socket and press firmly using both
module snaps into place.
4
＊
The pictures shown above are for reference only. Your
mainboard configuration may vary with the pictures shown.
