Albalá Ingenieros ATG3000C01, Manual, Page: 10 / 22

Albalá Ingenieros | Manual ATG3000C01
• The ATG3000C01 module and the mounting frame should always be
installed, maintained, operated and removed by personnel with sufficient
technical qualifications. The equipment should never be placed in damp
areas, near splashing liquid, or in explosive or corrosive atmospheres.
Neither modules nor mounting frames can be used in applications that
could endanger human life.
3.3. Environmental considerations
This symbol indicates that this equipment must be deposited at a collection
point for proper waste treatment once it has reached the end of its useful
life.
3.4. Power considerations
The UR3000 and UR3100 mounting frames can house as many ATG3000C01 modules as
will fit in them.
3.5. Module configuration
In addition to mechanical installation of the module into a mounting frame, several
program jumpers must be set to select the output signal levels. The tone frequencies are
set using selector microswitches.
The ATG3000C01 contains microswitches and program jumpers that should be set
before installation of the module into a mounting frame. These devices set:
- Selection of the tone frequency.
- Tone level adjustment.
3.5.1. Selection of the tone frequency
Switches 1 and 2 of S1 are used to set the frequency of the left channel according to
the following table.
L channel FREQUENCY S1
(kHz) 1 2
1 OFF OFF
2 ON OFF
4 OFF ON
8 ON ON
10