Albalá Ingenieros, S.A. IMB2000C01, Manual

Page: 12 / 36

Albalá Ingenieros | Manual IMB2000C01
3.3. Environmental considerations
This symbol indicates that this equipment must be deposited at a collection
point for proper waste treatment once it has reached the end of its useful
life.
3.4. Installing the module in the mounting frame
The following steps should be followed in order to install a IMB2000C01 module in the
mounting frame.
1 - Remove the blank panel covering the front of the empty slot chosen for installing the
IMB2000C01 in the mounting frame.
2 - Insert the IMB2000C01 module into the front of the mounting frame. The edges of
the card slide into two plastic guides inside the mounting frame.
3 - Secure the module to the mounting frame using the two front screws.
After these steps, the module is ready to be connected to other equipment.
3.5. Interconnection
The arrangement of the front panel connectors of the IMB2000C01 module is shown in
the following figure.
Front panel of the IMB2000C01
12