Albalá Ingenieros, S.A. DAB2008C01, Manual

Page: 19 / 28

Albalá Ingenieros | Manual DAB2008C01
The following functions of the DAB2008C01 can be performed remotely:
- Supervision of the status of the AUDIOFLEX bus and verification of the proper
configuration of the buses of the mounting frame.
- Assignment of the time slot for the AUDIOFLEX bus.
- Configuration of the gain and phase reversal of each channel.
- Configuration of the overload threshold.
- Supervision of the audio signals.
4.3.1. Details of the DAB2008C01 registers
The DAB2008C01 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The EEPROM section parameters are rarely used and are stored directly in non-volatile
memory.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 1.X
CONTROL
Name add ext msk snmp trap Description
ACTIVE_PRESET 0x00 0x3F Y N Shows the active preset
32=Preset 1, 33=Preset 2, 34=Preset 3, 35=Preset 4, 36=Preset 5, 37=Preset 6,
38=Preset 7, 39=Preset 8, 40=Preset 9, 41=Preset 10, 42=Preset 11, 43=Preset
12, 44=Preset 13, 45=Preset 14, 46=Preset 15, 47=Preset 16, ?=None
LOAD_PRESET 0x00 0x7F Y N Allows loading a preset
64=Preset 1, 65=Preset 2, 66=Preset 3, 67=Preset 4, 68=Preset 5, 69=Preset 6,
70=Preset 7, 71=Preset 8, 72=Preset 9, 73=Preset 10, 74=Preset 11, 75=Preset
12, 76=Preset 13, 77=Preset 14, 78=Preset 15, 79=Preset 16, ?=''
SAVE_PRESET 0x00 0xFF Y N Allows saving a preset
128=Preset 1, 129=Preset 2, 130=Preset 3, 131=Preset 4, 132=Preset 5,
133=Preset 6, 134=Preset 7, 135=Preset 8, 136=Preset 9, 137=Preset 10,
138=Preset 11, 139=Preset 12, 140=Preset 13, 141=Preset 14, 142=Preset 15,
143=Preset 16, ?=''
MAN_N_AUTO 0x01 0x01 Y N It allows selecting the slot working mode
0=Auto, 1=Manual
BASE_SLOT 0x01 0x7C Y N Base rack slot
= x
SLOT_USED 0x02 0x0F Y N Employed slot (read)
0=1, 1=2, 2=3, 3=4, 4=5, 5=6, 6=7, 7=8, 8=None
OVLD_LEVEL 0x03 0xFF Y N It allows selecting the overload audio level
= (x - 255)/4 dBFS (0=Mute)
19