Albalá Ingenieros, S.A. AEM3000C01, Manual

Page: 13 / 30

Albalá Ingenieros | Manual AEM3000C01
S1 ON S1 OFF
Switch 1. Embed enable Yes No
Switch 2. Erase before embed No Yes
Switch 3. Number of channels per group 4 2
Switch 4. Audio sample bit length 20 24
Switch 5. Not used Indifferent
Switch 6. Not used Indifferent
Switch 7. Not used Indifferent
Switch 8. Not used Indifferent
3.6. Installing the module in the mounting frame
The steps needed to install the AEM3000C01 module with the rear board in the
mounting frame are:
1 - Disconnect all power cords from the power supplies of the mounting frame.
2 - Remove the blank panels covering the front and rear of the empty bays chosen for
installing the AEM3000C01 in the mounting frame.
3 - Install the AEM3000P02 rear board ensuring that its 12-pin connectors are properly
aligned with the mounting frame´s mating connectors. Check that the orientation of
the board is correct by looking at the placement of the text printed on it according to
the illustration below.
Details for installation of the module in 3 RU mounting frames
13