AV OUT
DC IN 9-12V
AV IN/OUT
DC IN 9-12V
SD
AV OUT
DC IN 9-12V
AV OUT
DC IN 9-12V
AV IN/OUT
DC IN 9-12V
SD
AV IN/OUT
DC IN 9-12V
SD
5
4
Powering and installation
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
illustration.
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket.See illustration below.
System Connection
Note
Car cigarette lighter adaptor is available to use only when the car cigarette lighter
with DC 12V negative grounding.
The mains plug is used as the disconnect device, the disconnect device should
remain readily operable.
Car cigar ette lighter
Unit A
Unit A
Unit B
Unit B
Connecting To Unit A/B
1.Connect unit A and unit B with AV cable.
2.Connect the unit to power by AC/DC adapter or cigarette light adapter
3.Turn on these two units, insert a disc into the disc compartment of the main unit A,
press the IN/OUT key on remote control B to change Unit B to AV IN mode, then you
can see the same image on both units.
Please refer to the illustration below.
Note:
Unit B has AV IN and AV OUT function. Unit A only has AV OUT function. So unit A can be
connected to unit B and TV, unit B can only be connected to TV.
Unit A
Unit B
Summary of Contents for DVD8791BUK
Page 1: ...DVD8791BUK...
