6
Dual alarms operation
Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
1.
In standby mode, press and hold AL1 / AL2 until “12:00” flashes on the
display.
2.
While “12:00” is flashing, set the alarm time by repeatedly pressing HOUR /
MIN.
Press and hold HOUR / MIN respectively for fast advance.
3.
Repeatedly press AL1 / AL2 to select the desired alarm mode (buzzer or
radio).
Checking alarm time
Press and hold AL1 / AL2 for 2 seconds, the alarm time will flash briefly then
return to clock time.
To turn off the alarm, press POWER and the alarm will come on again at the
set time on the following days.
To cancel the alarm, in standby mode, press AL1 / AL2 until the alarm
indicator light goes out on the display.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When the snooze button is pressed, the alarm
sounds will stop and sound again after about 9 minutes.
The alarm indicator light will flash.
