GUARANTEE
CD OPERATION
MAINTENANCE AND CARE
SPECIFICATIONS
Stopping Playback
1. Press the
STOP
button once to stop playback.
Pausing Playback
1. To pause playback, press the
PLAY/PAUSE
button during playback.
2. To resume playback press the
PLAY/PAUSE
button once more.
Skipping Tracks
1. To skip to the next track, press the
button once. To skip further tracks, press the
button repeatedly until you reach the desired track.
2. To skip to the beginning of the current track press the
button once.
3. To skip to the previous track press the
button twice. repeat to skip multiple tracks.
4. To fast forward or rewind a track (during playback only), press and hold either
or
buttons, release when you reach the desired time to proceed playback.
Low Battery indicator
1. When the installed batteries reach a level where the voltage is becoming too low the
low battery warning icon
will appear on the display.
2. When the batteries become too low for operation, the unit will shut down. And the
batteries will need replacing.
MAINTENANCE AND CARE
To clean the CCD431 Personal CD player
•
Ensure the unit is in standby.
•
Wipe the case with a slightly moist, lint-free cloth.
•
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
•
Do not spray an aerosol at or near the unit.
•
Do not allow liquids to spill or objects to drop into any openings.
•
Always use original packaging if it is necessary to transport the unit at any time.
●
If this unit is used in a dusty environment, it may be necessary to have the unit serviced
at your local dealer periodically.
●
It is not advisable to allow large deposits of dust to accumulate within the unit as it may
prevent adequate cooling. Similarly dust deposits which become damp can sometimes
lead to electrical problems which may cause severe damage to the delicate electronics
within this unit.
Handling Discs
To remove the disc from its storage case, press down on the centre of the case and lift
the disc out. Hold it carefully by the edges as shown below
Insert the disc into the unit with the label of the disc facing UP. Gently wipe the disc using
a soft cloth from the centre to the outer direction to remove dust, fingerprints or any other
particles on the disc surface. Never use chemicals, such as record sprays, anti-static
sprays, benzene or thinners to clean the CD. These chemicals can damage the disc
surface permanently.
To avoid serious scratches on CD, keep them in the cases after each use. Scratches can
cause the laser pick-up skip in the future play. Do not place stickers or write anything on
the disc.
CD PLAYER
Frequency Response.........................................................................................20 ~20,000Hz
Sampling Rate.......................................................................................8 times over sampling
D/A Converter.....................................................................................................................1-Bit
GENERAL
Maxumum Output(Stereo Headphone................................................15mW+15mW(32ohm))
POWER SUPPLY
DC...............................................................................................3V with 2 size “AA” Batteries
Dimension................................................................................................5.1”x1.1”x5.9”(WHD)
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTIONS
CD player
does not work
Batteries are dead or low
Replace batteries
CD does not
play
CD wrongly inserted
Re-insert CD label side up
Defective CD
Try another CD
CD compartment not closed
Close CD compartment cover properly
Condensation in CD compartment
Remove CD and leave cover open for
about one hour to dry
No sound in
the earphones
Earphone jack not inserted properly Re-insert earphone jack in socket
Volume control is at minimum
Increase volume
Batteries low
Replace batteries or use mains lead
Defective CD
Try another CD
Skips during
play
Dirty CD or lens
Clean or replace CD, or clean lens
Strong vibrations
Place CD player on a flat & stable
surface (no vibration)
Through the process of continuous improvement, Argos Limited reserves the right to
change or alter specifications without prior notice. E&OE
Product Guarantee This product is guaranteed against manufacturing defects for a
period of
1 Year
This does not cover the product where the fault is due to misuse, abuse, use in
contravention of the instructions, or where the product has been the subject of
unauthorised modifications or alterations, or has been the subject of commercial use.
In the event of a problem with the product within the guarantee period please return it to
your nearest Argos store.
If the item is shown to have had an inherent defect present at the time of sale, the store
will provide you with a replacement.
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 – 499 Avebury Boulevard
Central Milton Keynes MK9 2NW