Copyright © 2020
Alazar Technologies Inc.
44
ATS9353 User Manual
Signal Connections
You can use CH A and CH B to digitize data as well as to trigger an acquisition.
Use the TRIG IN input for an external trigger only; data on the TRIG channel
cannot be digitized.
Use the ECLK input for clocking the ATS9353 in applications that require an
external clock. Signal levels are specified in detail in
for details on various types of clocking
schemes available.
Use the AN IN input to acquire the value of an analog input signal each time the
waveform digitizer is triggered; it cannot be used to trigger an acquisition. The
maximum sample rate is 200 KS/s (single shot).
AUX I/O connector can be used as the following I/Os:
Outputs:
•
Trigger Output
•
Pacer (programmable clock) Output
•
Software-controlled Digital Output
Inputs:
•
Trigger Enable Input
•
Software-readable Digital Input