4/12/17
2 of 2
Coffee Table
Step 2
Step 3
Step 4
CARE
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the order form
on the web site to order your replacement parts. Thank You!
Remove all parts and hardware from packing material. Wooden pieces should be placed on a
non abrasive surface to prevent damage to the finish.
Lay Top (A) upside down on a non abrasive surface. Attach 2 Posts (B) using 2-45MM Hex
Bolts (D).
NOTE: Do not tighen firmly at this time.
Attach Bottom (C) to Post (B) using 2-45MM Hex Bolts (D).
Note: DO NOT TIGHTEN
AT THIS TIME!
Attach two additional Post (B) to Top (A) and Bottom (C) using 4-45MM
Hex Bolts (D).
TIGHTEN ALL BOLTS AT THIS TIME
!
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
REPLACEMENT PARTS:
