ALAT UJI MS6612, User Manual

Page: 24 / 36

MS6612 Multi-functional Light Meter
31
Figure 3-1-2A Figure 3-1-2B Figure 3-1-2C
Tips
1: Only in auto measurement mode, peak value measurement mode, max/min value inquiry
mode and data hold mode, it will be effective to press and hold REL/PEAK key for a
short time.
2: In non-zero calibration mode, press and hold “REL/PEAK” for one second, the device will
enter the peak value measurement mode.
3.3 Application of maximum/minimum value inquiry mode
 Press and hold “MAX/MIN” key for a short time, “MAX” will appear on top LCD interface (as
shown in figure 3-1-3);

In max/min value inquiry mode, press “MAX/MIN” key once, you will switch MAX to MIN or
MIN to MAX;