3 |
P a g e
Test Tile Fan to make sure installation was done correctly before replacing access ceiling tile previously removed.
WALL CONTROL OPERATION:
Cleaning:
CAUTION!
Be sure electricity is turned off at the main fuse box or circuit breaker panel before cleaning.
Step1. Remove airflow cap and airflow grille.
Step2. Locate the hinge on one side of the Tile Fan and remove (by hand) the two square plastic nuts located the next to it. While holding the bottom
housing, remove the remaining two square plastic nuts located on the opposite side and gently allow the bottom housing to hang. Clean off the blades
and inside the housing cover with a damp cloth and soapy water. When done simply reverse the steps.
●
TURN THE “POWER” TO ON
●
SELECT THE DESIRED SPEED “LOW/HI”
● TURN THE “AIRFLOW” GRILLE TO ON
