4
ALARM LOCK SYSTEMS, INC. (ALARM LOCK) warrants its products to be free
from manufacturing defects in materials and workmanship for 24 months following the
date of manufacture. ALARM LOCK will, within said period, at its option, repair or
replace any product failing to operate correctly without charge to the original purchaser
or user.
This warranty shall not apply to any equipment, or any part thereof, which has been
repaired by others, improperly installed, improperly used, abused, altered, damaged,
subjected to acts of God, or on which any serial numbers have been altered, defaced or
removed. Seller will not be responsible for any dismantling or reinstallation charges.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR
IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL
OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF ALARM LOCK.
Any action for breach of warranty, including but not limited to any implied warranty of
merchantability, must be brought within the six months following the end of the warranty
period. IN NO CASE SHALL ALARM LOCK BE LIABLE TO ANYONE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS
CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.
In case of defect, contact the security professional who installed and maintains your
security system. In order to exercise the warranty, the product must be returned by the
security professional, shipping costs prepaid and insured to ALARM LOCK. After repair
or replacement, ALARM LOCK assumes the cost of returning products under warranty.
ALARM LOCK shall have no obligation under this warranty, or otherwise, if the product
has been repaired by others, improperly installed, improperly used, abused, altered,
damaged, subjected to accident, nuisance, flood, fire or acts of God, or on which any
serial numbers have been altered, defaced or removed. ALARM LOCK will not be
responsible for any dismantling, reassembly or reinstallation charges.
This warranty contains the entire warranty. It is the sole warranty and any prior
agreements or representations, whether oral or written, are either merged herein or are
expressly canceled. ALARM LOCK neither assumes, nor authorizes any other person
purporting to act on its behalf to modify, to change, or to assume for it, any other
warranty or liability concerning its products.
In no event shall ALARM LOCK be liable for an amount in excess of ALARM LOCK's
original selling price of the product, for any loss or damage, whether direct, indirect,
incidental, consequential, or otherwise arising out of any failure of the product. Seller's
warranty, as hereinabove set forth, shall not be enlarged, diminished or affected by and
no obligation or liability shall arise or grow out of Seller's rendering of technical advice
or service in connection with Buyer's order of the goods furnished hereunder.
ALARM LOCK RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY
TESTED WEEKLY.
Warning: Despite frequent testing, and due to, but not limited to, any or all of the
following; criminal tampering, electrical or communications disruption, it is possible for
the system to fail to perform as expected. ALARM LOCK does not represent that the
product/system may not be compromised or circumvented; or that the product or
system will prevent any personal injury or property loss by burglary, robbery, fire or
otherwise; nor that the product or system will in all cases provide adequate warning or
protection. A properly installed and maintained alarm may only reduce risk of burglary,
robbery, fire or otherwise but it is not insurance or a guarantee that these events will not
occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY
PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM
THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn
advise the consumer to take any and all precautions for his or her safety including, but
not limited to, fleeing the premises and calling police or fire department, in order to
mitigate the possibilities of harm and/or damage.
ALARM LOCK is not an insurer of either the property or safety of the user's family or
employees, and limits its liability for any loss or damage including incidental or
consequential damages to ALARM LOCK's original selling price of the product
regardless of the cause of such loss or damage.
Some states do not allow limitations on how long an implied warranty lasts or do not
allow the exclusion or limitation of incidental or consequential damages, or differentiate
in their treatment of limitations of liability for ordinary or gross negligence, so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal
rights and you may also have other rights which vary from state to state.
ALARM LOCK LIMITED WARRANTY
pack: Before replacing the battery pack, carefully push all
of the remaining wires that are inside the housing down into
the "cavity" shown in
Fig. 1
. Replace the battery pack by
placing the right side of the battery pack into the hous-
ing first
(see
Fig. 3
and
Fig. 4
).
9.
At the back of the lock, replace the cover and secure with
the cover screw.
GENERAL PURPOSE APPLICATIONS
When driving high loads such as door strikes or magnetic locks,
the
RR-RECEIVER
solid state relay should be wired to drive
an auxiliary high current relay as shown in the following wiring
diagram:
12V POWER
SUPPLY
RR-
RECEIVER
HIGH
CURRENT
RELAY
HIGH CURRENT LOAD
(DOOR STRIKE
MAGNETIC LOCK
ETC.)
<= 100MA COIL
CURRENT
COIL
N/O
N/C
COM
+
–
+
–
(U
SE EIT
H
ER
CO
NNE
CTO
R
)
+
–
POWER
POWER
RELAY
WH
IT
E
WH
IT
E
+
–
RED
BLACK
WIRING DIAGRAM
FOR DRIVING HIGH LOADS