LED guide
LED pattern
Status
Description
Connected to internet
Local network and internet
connection with Alarm.com IP.
Local network connection
Local network connection with local
IP address, no internet.
Note
: If the LED does not go to a
solid green after a few minutes,
see
.
Power on, or no network
connection
Power on, system booting up
typically 60-90 seconds.
If solid red for longer than 60-90
seconds, then there is no local or
Internet connection.
Firmware update
Device firmware update is in
progress.
Factory reset
The video device is restoring to
factory default settings.
Caution
: If the video device is
already installed, it may need to be
removed from the Alarm.com
account and re-added after a factory
reset.
To perform a factory reset, use a thin
tool (e.g. paper clip) to hold the reset
button for about 10-15 seconds.
Updated: Thu, 11 Apr 2019 14:59:12 GMT
3
