Alaris Passport Flatbed Accessory, User Manual

Page: 15 / 18

A-61882 December 2018
11
Using the Alaris Passport Flatbed Accessory
Cleaning the flatbed
(E1000 and S2000
Series)
The glass platen of your flatbed can collect fingerprints and dust. Use
Brillianize Detailer Wipes/ for
Kodak Scanners (CAT No. 826 6488) to
clean the glass platen.
IMPORTANT: Do not spray or pour cleaning liquids on the flatbed glass
platen, as these liquids may seep under the glass and
cause damage.
1. Power the scanner off before cleaning. If you have an E1000 series
scanner, power off the scanner and disconnect the USB cable from
the flatbed.
2. Wipe the glass platen with a Brillianize Detailer Step 1 wipe. For
best results wipe in one direction only, for example right to left.
3. Wipe the glass platen again with a Brillianize Detailer Step 2 wipe.
Indicator light (E1000
and S2000 Series)
When the light is steady, the flatbed is ready to scan.
When the light is blinking, the flatbed is calibrating.
When the light is blinking rapidly, the flatbed has a problem.