ALAN Electronics Tectalk FM PMR 446, Service Manual

Page: 13 / 34

3.4-6 SUB OPTION SELECTION MODE
This mode allows you to enter the sub option selection mode.
-Press the Function Button (#12) until the word “ Sub ” appears in the LCD.
You can now select between “ yes ” or “ No ”.
-If you press the Function Button (#12) when “yes” blinks on the
LCD Panel (#8), you enter into the Sub Function edit menu.
- Pressing the Function Button (#12) when, “no” blinks, returns to standby.
Access to following SUB Menu points is only possible when You have
avtivated the SUB menu by setting to “Yes”
1) CALL RINGER MELODY SELECTION MODE
This feature provides 7 user selectable call ringer melodies to
alert you of a calling party.
To select your favorite Call Ringer melody,
- In the Sub option selection mode, press the Function Button
(#12) when the “yes” blinks.
- Press the Down Button (#11) or Up Button (#10) to preview the
seven available melodies.
- Press the Monitor Button (#2) to confirm your selection.
2) BEEP TONE SELECTION MODE
This feature allows you to program beeping or not beeping with
key selection.
If the Key beep off is chosen no beep sound when you press the
button The call signal, power on/off beep and roger beep make a
sound regardless of the beep.
- Press the Function Button (#12) from the Call selection mode.
- Press the Up Button (#10) or Down Button (#11) to select from
on or off.
- Press the Monitor Button (#2) to confirm your selection and
return to standby mode.
- When you press Enter button (#13) or do not press any key within 5
seconds, it returns back to stand-by.
3) ROGER BEEP SELECTION MODE
If Roger Beep option is on, when you finish the transmitting auto-
matically the TECTALK FM will produce a beep sound and transmit a
sub-code tone to the partner.
To access the Roger Selection Mode :
- Press the Function Button (#12) from the Key beep selection mode.
- Press the Up Button (#10) or Down Button (#11) to select from
Roger on or off.
- Press the monitor Button (#2) to confirm your selection and
return to standby mode.
4) SQUELCH TAIL SELECTION MODE
This feature allows you to set option mode of CTCSS squelch tail
elimination.