8
English
To check the selected VOX sensitivity
• Press
FUNC
for at least 1,5 secs.
• Press
FUNC
twice more. The selected VOX sensitivity is shown
in the display. To revert without making changes press
.
I
The VOX function applies to all channels.
Menu 4 – Scanning
This menu allows you to select the channels you want to scan.
The scanning function makes it possible to survey radio communica-
tion on several channels at the same time. The radio automatically
cycles through the channels you have chosen to survey. When a
signal is detected the scan automatically stops at that channel and
you can hear the communication. Thereafter the scan automatically
starts again after 4 secs.
I
In menu 5 we describe how to start the scan.
To select the channel/channels you want to survey
• Choose with
or
the channel that you want to survey.
• Press
FUNC
for at least 1,5 secs.
• Press
FUNC
three more times until
Sc
starts flashing in the
display.
• Press
to confirm. The radio reverts to its normal condition
and
Sc
is indicated on the channels which are to be scanned
(surveyed).
To deselect channels from the surveillance list
• Choose with
or
the channels you want to deselect.
• Press
FUNC
for at least 1,5 secs.
• Press
FUNC
three more times until
Sc
starts flashing in the
display.
• Press
to confirm. The radio reverts to its normal condition.
Menu 5 – Start scanning
To start the scan
• Press
FUNC
for at least 1,5 secs.
• Press
FUNC
four more times until
JA
is shown and
Sc
flashes
in the display.
• Press
to start the scan. All channels that you have selected
to survey will be cycled through in the display.
To stop the scan
• Press
to stop the scan.
I
If a CTCSS tone is selected on a channel the scan only stops if
the right CTCSS tone also is received.
