Alamo Bush Hog HDC-3 Series, Operator'S Manual

Page: 43 / 102

INTRODUCTION
INTRODUCTION
HDC-3 ZT 05/19 Introduction Section 2-3
© 2019 Alamo Group Inc.
SPECIFICATIONS
HDC2 Series Zero Turn Mower
MODEL ENGINE CUTTING WIDTH
HDC2361FS3.......................................23 HP Kawasaki FS691 ..............................................................61” Deck
HDC2561KP3 ......................................25 HP Kohler KT745 & Pro Filtration ..........................................61” Deck
CONTROLS ......................................... Electronic Control Module with Keyless Start, System Monitoring and
Soft Start PTO Engage
PTO ......................................................Electromagnetic Clutch rated at 200 FT/LBS
FUEL CAPACITY .................................8 Gallons (87 Octane Unleaded Gasoline)
TRANSAXLES .....................................(2) Hydro-Gear ZT 3400 Hydrostats
TIRES ..................................................Front - 13 x 6.5 - 6
Rear - 23 x 10.5 - 12 (Turf Tires Standard)
TREAD WIDTH ....................................50”
HEIGHT to TOP OF SEAT BACK .......47” Non Suspension Seat / 51” Full Suspension Seat
STEERING ...........................................Dampened Twin Lever, Adjustable Fore, Aft and Vertical
SPEED .................................................Infinitely Variable 0-10 mph Forward, 0-4 mph Reverse
DECK SPECIFICATIONS
CUTTING WIDTHS ...........................................................61”
OVERALL WIDTH (CHUTE DOWN) ................................75”
BLADES (Standard) ........................................................(3) 21” Uplift
CUTTING HEIGHTS ............................1-1/2” to 5” Adjustable in 1/4” Increments
DECK CONSTRUCTION .....................7 Gauge reinforced steel
SAFETY
Integrated Operator Presence Controls
2-7/8” Round Tube ROPS
Seat Belts