GENERAL OPERATION
The AL-KO iQ7 has been designed to operate in all ‘normal’ environmental conditions and
it has been left to the discretion of the installer as to the location of the actuator. Although
the AL-KO iQ7 housing is partly sealed to protect the internal components from the external
environment, when exposed to corrosive environments such as salt water, fertiliser, and
other caustic materials, care must be taken to protect the unit at all times. Although water-
resistant, the AL-KO iQ7 unit is NOT waterproof and should NEVER be submerged at any
time. It is therefore suggested that the AL-KO iQ7 unit be mounted towards the front of the
towed vehicle and as high as practical (i.e. the bow post if used in the marine environment.
Refer Fig. 1, Page 2).
! WARNING
Never submerge the AL-KO iQ7 actuator at any time. Submerging may cause system
malfunction resulting in possible serious or fatal injuries and/or property damage.
Submerging will void warranty.
! WARNING
Never apply solvents or adhesives (including brake fluid) to the actuator housing as this
may weaken the housing resulting in possible serious or fatal injuries and/or property
damage. Brake Fluid will damage any painted surfaces.
1
alko.com.au
