10
Translation of original user instructions
Introduction
Read the documentation completely before com-
missioning. This is necessary to ensure a safe and
trouble-free operation.
Observe the safety instructions and warning noti-
ces in this documentation and on the equipment.
This documentation is integral part of the de-
scribed product. It should be handed over to the
purchaser at the time of purchase.
Legend
Warning!
Strictly observe the warning notices to prevent inju-
ries and damage.
Special indications for a better understanding
and use.
Symbols on the device
Before commissioning read the
instructions for use!
Keep other people out of the danger
area!
Remove the spark plug connector
before working on the cutting unit!
Danger! Keep hands and feet away
from the cutting unit!
Wear protective glasses!
Wear hearing protection!
Intended use
The equipment is designed to scarify and aerate
(thatch) your home lawn. It should be used only on
dry and short grass.
Any different use does not constitute an intended use.
Warning!
The equipment is intended for domestic use only.
Safety instructions
The equipment should be used only if in good or-
der and condition
Do not deactivate safety and protection devices
Wear protective glasses and hearing protection
Wear long trousers and sturdy shoes
Keep hands and feet away from the
cutting unit
Keep other people out of the danger area
Remove all foreign objects from the work area
Before leaving the equipment unattended:
Turn the engine off
Wait for the cutting unit to stop
Remove the spark plug connector
Do not leave the equipment unattended
Children and other persons who are unfamiliar
with the operating instructions must not operate
the machine.
Observe local regulations regarding minimum age
requirements for operating the machine.
Safety and protection devices
Safety control bar
The equipment is equipped with a safety control bar.
When this bar is released, the equipment immediately
stops.
Back cover
The equipment is equipped with a back cover.
Visual safety indicator
(picture I)
The visual safety indicator shows whether shaft is
properly fi tted and secured. When the green mark is
visible (5 mm), the shaft is properly secured.
Assembly
Assemble the equipment as shown in the illustration
section (picture A-F).
Warning!
The equipment can be used only after complete as-
sembly.