10
3-3. Quick Reference
When you move EASISAT 3.0, make sure the position of antenna should
be in Home position.
WARNING
Purchase Power Adapter separately from us, or if you purchase it on your
NOTE
Car Mounting Instruction will be provide separately.
NOTE
Setting
&
Connecting
mount it on the top of the camper)toward the South sky & no obstacle.
1.
One end of the controller cable connect to "controller" port of the main
unit of antenna.
The other end of the controller cable connect to the port of the controller.
a.
b.
Connect between the left port of the antenna, which located in the back
side of the main unit, and controller using controller cable.
2.
If you use the power source from car, using cigar jack to connect the
power to controller.
Otherwise, using adapter cable to connect the power to controller.
a.
b.
Connect the power cable to controller .
3.
Connect between the right port of the antenna, which located in the back
side, and receiver using receiver cable.
4.
Operating
(Searching the satellite)
Switch on with the “Power switch” button on the top of the controller.
Wait until “HOME State” light & one “Satellite LED” light, which you set
Select the desired satellite using the “UP/DOWN” buttons, then press the
“OK” button to accept.
When the satellite LED light become solid on, watch the satellite TV!!
1.
2.
3.
4.
5.
6.
