AK-QIR-02 - user manual
p. 3
Problem
Cause
Solution
A device connected via
adapter qi does not
charging
No mains voltage
ź
Check the correct connection of
the adpater to the mains socket
ź
Check the mains fuses
Bad phone position
ź
Place the phone directly on the
charging surface
ź
Place the phone with the back
side in the center of the
charging surface
ź
Do not charge your phone close
to intense magnetic field
sources
There is a suspicion of a
product defect
ź
Stop using and contact with
seller
Slow charging process
Bad adapter position
ź
Place the adapter directly on
the charging surface
ź
Do not charge your phone close
to intense magnetic field
sources
Too long distance
between the chager and
the phone
ź
Take off the case
ź
Place the phone with the back
side in the center of the
charging surface
ź
Do not place any objects
between the charginng surface
and the phone while charging
ź
Clean the charging surface and
back side of the phone
Removing the most common problems
adapter QI
Adapter assembly
1. Open the back cover.
2.
3.
4. Make sure that adapter fits in back cover.
Make sure that the adapter has contacts in corresponding type with
your device. The socket must be compatible with adapter’s contacts,
so that after installing adapter in the device you can close the cover
without using force.
Place the adapter’s contacts in device’s socket.
5. Close the back cover.
