AK-EC-07 - user manual
p. 4
EV charger
Failure LED
State LED
Charge LED
Notice
---
Shine
---
Off
, no connection with the car
---
Blink slowly
---
There is a connection with the
car but it does not charge
---
Blink fast
---
Car communication failure
---
Flashes
Shine
Car is charging
---
---
---
End of charging process
Blink
Shine
---
Charger failure
Charging status indicator
How to use
1. Check that the charger or cable is not damaged.
2. Make sure the charger has the right type of plug for your car.
4. Check that the power socket is not damaged.
5. Connect the charger to the electrical outlet (Schuko).
8. Connect the other plug to the car's charging port.
3. Turn off the car motor.
6. Select the appropriate charging current by pressing the button.
7. Pull the protective cap off the plug.
9. The charging process will start automatically. The red diode will light up.
10. When the charging process is finished, the charger will automatically turn off. The LEDs will
turn off.
11. After charging, disconnect the charger from the electrical outlet, then disconnect the plug
from the car's charging port by pressing the button that releases the clip and put the
protective cap on.
Cleaning the EV power adapter
ź
Use soft and antistatic cloth for cleaning the charger.
ź
Do not use abrasive or chemical cleaners.
Disconect the EV charger from the electrical socket and connected devices before cleaning.
