User manual
Akyga AK-CA-25
1. Alarm temperature indicator
The alarm temperature is set via the SET key (6). After exceeding this temperature, the module will automatically
increase the fan speed.
2. Alarm indicator
The indicator will light up when the alarm temperature is exceeded and will go off after cool down.
3. Fan power indicator
Lights up when the fan is running
4. HDD / SSD disk activity indicator
Shows the activity of a hard disk drive
5. RESET button
Resets the alarm temperature and fan power to the basic settings.
6. SET button
Gradually increases the alarm temperature.
7. UP button
Gradually increases the fan power.
8. Fan speed indicator
Indicates the current fan speed (a fan with a 3-pin plug is required for proper operation).
9. Fan power indicator
Indicates the current fan power (gradually every 20%).
10. Temperature indicator
Indicates actual temperature.
11. 3-pin fan power connector
For fan power supply (necessary for proper operation)
12. Goldpin HDD / SSD plug
Optional (needed only for proper operation HDD / SSD disk activity indicator (4) )
13. Thermometer sensor
Place close to a place that is exposed to overheating (necessary for proper operation)
14. MOLEX connector
Power the LCD panel and fan (necessary for proper operation)
NOTE: Panel during anomalies (eg no fan speed readout (8) or alarm temperature occurrence is beeping
