AK-BC-01 - user manual
p. 3
ź
Short-circuiting the current connection is prohibited.
ź
In case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
ź
All maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
Problem
Cause
Solution
A cell connected to an
electrical outlet via
charger does not charge
No mains voltage
ź
Check the correct connection of
the charger to the mains socket
ź
Check the mains fuses
The battery charger is
overloaded
ź
Disconnect the charger from the
power network, heck the
correctness of the current
parameters
Incorrect placement of
the cell in the charger
ź
Place the cell according to the
polarity marked on the charger
There is a suspicion of a
product defect
ź
Stop using and contact the
seller
Removing the most common problems
battery charger
1.
Connect the charger via added power cord to the electrical outlet.
2.
Place the cells in the battery charger. Make sure that the cells are correct placed in the
charger.
3.
The progress of the charging process is displayed on the LCD display.
4. The full battery symbol signals that the battery has been charged.
5.
After charging the cells, disconnect the charger from the mains socket, then remove the
cells.
Preparing the Battery Charger for Use:
Cleaning the power supply
ź
Use soft and antistatic cloth for cleaning the battery charger.
ź
Do not use abrasive or chemical cleaners.
Disconect the power supply from the electrical socket and connected devices before cleaning.
