- Artnet
: 3 parameters are adjustable:
- Start Adress
: the first DMX channel used
- Net, Subnet, Univers
: The desired ArtNet config.
- Output mode
: Selection between Broadcast (ArtNet is sent to every
connected device) and Unicast (ArtNet is sent to a specific device). In
Unicast Mode, you must enter the IP Address of the destination
peripheral.
- IP Config
: Configuration of the IP and SubNet mask of your Kontrol3.
Info Menu
: Firmware version information
Reset
Menu : Reset the Kontrol3 to the state it was in when we shipped it to
you.
6