Akuvox SP-R52P User Manual Download

Page: 52 / 82

directly-connected devices. LLDP is often used to configure
Voice Vlan automatically for IP phone.

Local RTP

To display and configure Local RTP settings.



Max RTP Port: Determine the maximum port that RTP
stream can use.



Min RTP Port: Determine the minimum port that RTP
stream can use.

SNMP

To display and configure SNMP settings.



Active: To enable or disable SNMP feature.



Port: To configure SNMP server’s port.



Trusted IP: To configure allowed SNMP server address,it
could be an IP address or any valid URL domain name.

Note: SNMP(Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP
networks.

VLAN

To display and configure VLAN settings.



LAN Port/PC Port: You can configure VLAN setting for
both ports respectively.



Active: To enable or disable VLAN feature for designated
port.



Vid: To configure VLAN id for designated port.



Priority: To select VLAN priority for designated port.

Note: Please consult your administrator for specific VLAN
settings in your networking environment.

QoS

To display and configure QoS settings.



SIP QoS: To configure QoS value for all SIP message.



Voice QoS: To configure QoS value for all audio
stream(RTP streams).

TR069

To display and configure TR069 settings.



Active: To enable or disable TR069 feature.



Version: To select supported TR069 version (version 1.0
or 1.1).



ACS/CPE: ACS is short for Auto configuration servers as
server side, CPE is short for Customer-premise
equipment as client side devices.



URL: To configure URL address for ACS or CPE.



User name: To configure username for ACS or CPE.



Password: To configure Password for ACS or CPE.



Periodic Inform: To enable periodically inform.



Periodic Interval: To configure interval for periodic
inform.

Note:

TR-069(Technical

Report

069)

technical

specification entitled CPE WAN Management Protocol
(CWMP).It defines an application layer protocol for remote

Summary of Contents for SP-R52P



















































































Search results

Summary of Contents for SP-R52P

Reviews:

Related manuals for SP-R52P

Brands by name

Popular brands

Akuvox SP-R52P, User Manual

Search results

Summary of Contents for SP-R52P

Reviews:

Related manuals for SP-R52P

Brands by name

Popular brands