Akuvox R63G User Manual Download Page 82

Page: 82 / 96



Name Filter: The settings used to tell LDAP server
what name attributes to search.



Number Filter: The settings used to tell LDAP server
what number attributes to search.



Server: To configure LDAP server’s address.



Port: To configure LDAP server’s port.



Base DN: To configure searching base DN on LDAP
server.



User Name: To configure user name for accessing
LDAP server.



Password: To configure password for accessing
LDAP server.



Name Attribute: To configure which name attributes
should be feedback from LDAP server.



Number Attribute:To configure which number
attributes should be feedback from LDAP server.



Display Name: To configure display name on Phone
UI when there is any searching result from LDAP
server.



Max Hits: To configure the maximum size of result
response from LDAP server.



Search Delay Time: To configure delay time before
initiate LDAP searching request after you input a
value from Phone UI.

Note

: For setting details,please consult with your system

administrator for further information.

Summary of Contents for R63G

































































































Search results

Summary of Contents for R63G

Reviews:

Related manuals for R63G

Brands by name

Popular brands

Akuvox R63G, User Manual

Search results

Summary of Contents for R63G

Reviews:

Related manuals for R63G

Brands by name

Popular brands