19
R20A
Admin Guide
Switch card status to “Card Issuing” and click “Apply;”
Place card on the card reader area and click “Obtain;”
Name card, choose which door users want to open and the
valid day and time;
Click “Add” to add it into list.
Valid card information will be shown in the list. Administrator could
delete one card’s access permission or empty all the list.
Note:
Remember to set Card Status back to “Normal” after adding
cards.
3.6.4.Unlock via HTTP command
Users can use a URL to remote unlock the door.
Go to
Intercom
-
Relay
to configure.
Switch:
Enable this function. Disable by default.
UserName&Password:
Users can setup the username and
password for HTTP unlock.
URL format:
Figure 3.6.3-2 RFID cards in website
Figure 3.6.4 Unlock via HTTP command
