Akuvox A02 Access Control Terminal Admin Guide
48
19.2 Integration via HTTP API
HTTP API is designed to achieve a network-based integration between the third-party
device with the Akuvox intercom device. You can configure the HTTP API function on the
web
Setting > HTTP API
interface for the integration.
Parameter Set-up:
•
HTTP API:
select
Enable
or
Disable
to enable or disable the HPTT API function for
the third-party integration. For example, if the function is disabled any request to
initiate the integration will be denied and be returned HTTP 403 forbidden status.
•
Authorization Mode:
select among four options
: None, Allowlist, Basic, Digest, and
Token
for authorization type, which will be explained in detail in the following chart.
•
Username:
enter the user name when
Basic
and
Digest
authorization modeis
selected. The default user name is Admin.
•
Password:
enter the password when
Basic
and
Digest
authorization modeis
selected. The default user name is Admin.
•
1st IP-5th IP:
enter the IP address of the third-party devices when the
Allowlist
authorization is selected for the integration.
19.3 Power Output
A02 can provide 12V power to Akuvox devices and third-party devices through
Relay_Com1 and GND-OUT. To enable the power supply, go to
Access Control > Relay > 12
Power Out
.
