Akura ATL1510W, Instruction Manual

Page: 11 / 19

TV
PC
V
V
1.Connect the T to the PC using a 15pin VGA lead (not supplied) and Audio to the PC audio
socket
2.Press the TV/AV button to display the source menu, use the CH+/- buttons to select PC and
press Vol + to confirm. The T will now display the signals from the PC. You may need to
adjust the PC to the TV. See page 14
TV
AV
S
-
VIDEO
SCART
PC
Channel
Move Select Exit
Auto Tune
Manual Tune
Fine Tune
Skip
Sound
.
SYS
Channel Swap
Off
I
1.Connect the Power adaptor to the DC input socket and the Aerial lead to the TV Tuner input.
2.To turn ON, press the “Power Button”.
3.Press the
TV/AV button on the TV or Remote Control, the source menu
will display on the screen “as seen on the right”. Use the CH+/- buttons
to select the source, press Vol + to confirm.
4.Press the MENU button on the TV or the MENU button on the
remote control, the screen will display the OSD menu, press the CH+/-
button to select the third menu Channel (see picture below)press the Vol +
button to enter the menu, press CH+/- buttons to select the item“Auto Tune”.
Press the Vol + button, the TV will start to search from the lowest frequency upwards. When a
station is found it will be stored automatically in the “First” location, further received stations will
be stored in order. When Auto Tune is completed the Tv will display the first station received. In
most cases the stations stored will not be in Channel Order i.e. BBC1 will not be in Location “1”.
To move the stations into the correct locations you will need to use “Channel Swap” see page 13.
Note when Auto Tune starts, to stop it press MENU , otherwise leave to complete the search.