Akura ATL1510W-ID, Instruction Manual

Page: 14 / 31

Auto Tune
140
.
15MHz VHF L
0
7
.
3 Channel Menu ( The menu is only used in TV mode)
Channel
Move Select Exit
Auto Tune
Manual Tune
Fine Tune
Skip
Sound
.
SYS
Channel Swap
Off
I
Auto Tune. Press the CURSOR RIGHT button, the TV will start to search from the lowest
frequency up- wards. When a station is found it will be stored automatically in the “First” location,
further received stations will be stored in order. When Auto Tune is completed the TV will display
the first station received. In most cases the stations stored will not be in Channel Order i.e. BBC1
will not be in Location “1”. To move the stations into the correct locations you will need to use
“Channel Swap” see page 12.
Note when Auto Tune starts, to stop it press MENU , otherwise leave to complete the search.
Manual Tune
:
press CURSOR LEFT button to search forwards
,
and press CURSOR RIGHT button
to search backwards
.
When a station found
,
it will be stored automatically
.
Fine Tune : press the CURSOR LEFT button to tune upwards and press CURSOR RIGHT to tune
downwards. (Normally fine tune will not be necessary).
Skip . Some received channels may be unwanted, they may be noisy or weak stations from another
area, to remove these from the list select “Skip” . When skip is selected for a particular channel,
that channel is “Skipped” when using the CH+/- buttons. You may still select using the “Numeric”
buttons.
Sound SYS . This is used to select the “sound system” for the particular country or area. In the UK
it must be set as “I”. In Western Europe use “B/G”, Eastern Europe use “D/K”, in certain areas of
France use “L”.