25
(3) Press the [INDEX+/-] buttons, the VCR will wind(fast forward or rewind) a tape and play the
first part for 5 seconds whenever the index mark is found.
After 5 seconds it will wind (fast forward OR rewind) again until it reaches the next index mark.
If the [Play] button is pressed during temporary playback (within 5 seconds), the VCR will go
to normal playback mode.
(4) During the operation of VISS, the mode displayed contents are as follow:
PICTURE ADJUSTMENT
1. TRACKING
1-1. AUTO TRACKING
(1) Under the following conditions the “auto tracking” operation is performed automatically.
- When a
pre recorded
cassette tape is inserted and is played back.
- When the playback speed is changed during continuous played back.
- When a signal is detected after a temporary signal loss during continuous playback.
- When a tape, which has a signal is played after “Power on”.
- When a tape is played back after recording.
(2)
During autotracking and the Stop button is pressed, the autotracking operation will be stopped.
However if the Play button is pressed again the auto tracking will start again.
1-2. MANUAL TRACKING
(1) In playback mode press the [1] or [3] buttons to adjust the tracking manually. Unfortunately
there is no “on screen display” to note the optimum setting. This can only be done visually.
(2) In special playback mode, tracking data is obtained in slow mode.
REW SP
INDEX -01
-0:00:30
PLAY SP
-0:00:45
REW SP
INDEX -02
-0:00:55
PLAY SP
-0:01:30
------->
------->
------->
----->
FF SP
INDEX -01
0:00:30
PLAY SP
-0:00:45
FF SP
INDEX -02
-0:00:55
PLAY SP
-0:01:30
------->
------->
------->
----->
