background image

ON HANDLING DISCS

ON CLEANING DISCS

Do not touch the playback side of the disc.

Do not attach paper or tape to disc.

Fingerprints and dust on the disc casue picture
and sound deterioration. Wipe the disc from the
centre outwards with a soft cloth. Always keep
the disc clean.

If you can not wipe off the dust with a soft cloth, 
wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.

Do not use any type of solvent such as thinner, 
benzine, commercially available cleaners or anti-
static spray for vinyl Lps. It may damage the disc.

REPEAT

Press the “REPEAT” button before or during playing CD, a single track or all the tracks can be repeated.
Each press switches the repeat mode as follows:

1 - REPEAT 1  ( The repeat indicator is flashing. )
2 - REPEAT ALL  ( The repeat indicator is steadily on. )
3 - NORMAL PLAYBACK

REPEAT 1

REPEAT ALL

NORMAL

PLAYBACK

CD OPERATION

Page 7

PROGRAM

Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1.  Press the “PROGRAM” button, the display will show “01” and flash.
2.  Select desired track by using the “SKIP +” or “SKIP -” button.
3.  Press the “PROGRAM” button again to confirm desired track into the program memory.
4.  Repeat step 2 and 3 to enter additional tracks into the program memory.
5.  When all the desired tracks have been programmed. Press the “PLAY / PAUSE” button to play the
     disc in the order you have programmed and the program indicator flashes.

6.  Press the “STOP” button twice to terminate programmed play and the program indicator will turn off.

Summary of Contents for APTMIC110AR











Reviews: