background image

2. Safety Instructions

CAUTION. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS 
USER MANUAL AND MARKED ON THE APPLIANCE. RETAIN THIS BOOKLET FOR FUTURE USE.
This set has been designed and manufactured to assure your personal safety.  Improper use can 
result in Electric shock or Fire hazard. The safeguards in this appliance will protect you if you 
observe the correct procedures for installation, servicing and operation.  There are NO user 
parts inside. DO NOT REMOVE THE CASE OR OTHER COVERS OR YOU MAY BE EXPOSED TO 
DANGEROUS VOLTAGES AND WILL INVALIDATE YOUR WARRANTY.  REFER ALL SERVICING 
TO QUALIFIED SERVICE PERSONNEL.

Unpacking and Handling

. Open the carton carefully and remove the polyfoam packing. Carefully lift 

the TV and place onto a firm stable surface. Lift off the Poly bag and retain all packaging for future use.  
Keep all packaging away from small children and animals.

Placing TV

.  The TV should be placed on a firm table or shelf. If placing in a cabinet ensure there is 

sufficient spacing for air flow and access for the DVD player opening

.

.

Connections

.  When connecting the TV to external sources and the mains supply, do not place wires 

that can be tripped over. Do not trap or place heavy objects on the mains lead or adaptor.

Ventilation and Heat Sources

. Do not place material over the ventilation slots, this will cause the TV to 

overheat and fail. Do not place the TV in direct sunlight or near heat sources such as radiators or fires.

Moisture.

Do not place the TV in wet or damp conditions, such as steamy kitchens, basements or other 

damp places. Do not allow water or other fluids to enter the TV. Do not touch the Mains plug or adaptor 
with wet hands. Should moisture enter the TV, disconnect from the supply and call the customer help 
line.

Cleaning.

Disconnect the TV from the mains supply. Use a soft dry cloth, for stubborn stains use a soft 

moist cloth with a dilute mild detergent.. Do NOT use petrol based fluids or abrasive materials.

LCD Screen.  

Do not hit or cause impact to the LCD screen. The screen consists of many individual 

pixels and is easily damaged. Bright or dark dots may occur and are not covered by warranty. 

3

DIGITAL SWITCH OVER AND YOUR TV.

WHAT YOU NEED TO DO TO ENJOY WATCHING TV DURING AND FOLLOWING DIGITAL SWITCH 
OVER.

Starting in 2008 and ending in 2012, television services will go completely digital, TV region by TV region.
To continue using this digital TV during and following the digital switchover, you will need to “reset” your 
digital TV channels.
Users of this digital TV must reset on at least 2 different occasions, normally 1 month apart when your 
switchover happens.  Digital UK, the body leading the digital switchover, and broadcasters, will advise you 
when to reset your digital channels on each occasion.

If you do not reset your digital channels, you risk loosing some or all of your TV services during and 

following switchover.
Please refer to this instruction manual to retune the Digital TV services.

Do NOT use “ADD” channels, you MUST “AUTO TUNE” and allow a complete retune. (See page 13)

For more information please contact the “Customer Help Line” (Page 18) or visit www.digitaluk.co.uk

Lightning. 

During a thunderstorm or when leaving the appliance for long periods such as holidays, disconnect the 
aerial input (if external aerial) and remove the mains plug, This is to prevent power surges damaging the 
apparatus

Headphone Use.

When using headphones do not use for long periods. Loud music can permanently damage your hearing.

Dis-connection Device.

The mains plug is the Disconnection device and MUST be accessible at all 

times

Candles and Open flames

. Do not place lighted candles (“T” Lights) on the top or at the sides of the 

TV, or any other naked flame near the TV cabinet.

Ventilation slots

.  Do not allow objects to be dropped inside the ventilation slot, this could cause a short 

circuit and a possible fire. Do not allow chains to be dangled into the TV. A serious electrical shock my 
occur.

Summary of Contents for APL3268FD






















Reviews: