background image

WARNING

E-1

TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING : SHOCK HAZARD-DO NOT OPEN

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

LIGHTNING FLASH WITH ARROWHEAD SYMBOL -

within an equilateral triangle, is intended to alert the 
user to the presence of uninsulated dangerous 
voltage within the products enclosure that may be of 
sufficient magnitude to constitude a risk of electric 
shock to persons.

EXCLAMATION POINT -

 

within an equilateral triangle, 

is used to indicate that a specific component shall be
replaced only by the component specified in that 
documentation for safety reason.

The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:

CLASS 1 LASER PRODUCT LABEL -

This label is attached to the place as illustrated to inform that the 
apparatus contains a laser component.

WARNING LABEL INFORMING OF RADIATION - 

This label is

 placed inside the unit. As shown in the illustration. To 

warn against further measures on the unit. The equipment contains 
a laser radiating laser rays according to the limit of laser product of 
class 1.

CLASS 1 LASER PRODUCT
KLASS 1 LASER APPARAT
LUOKEN 1 LAISERLAITE
KLASSE 1 LASER PRODUKT

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE) 
The crossed out “Wheelie bin” is intended to show that this appliance 
must not be placed with ordinary household waste at the end of its 
useful life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please keep separate from
other household waste and recycle it responsibly to promote the
sustainable reuse of material resources.
 Household users should contact either the retailer where you
purchased the product, or their local government office for details of
where and how you can take this item for environmentally safe re-
cycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product must not be mixed 
with other commercial wastes for disposal

Summary of Contents for APCD-713A











Reviews: