Basic Playback
B a s ic O pe ra tio n
OPEN/CLOSE
PLAY/PAUSE
STOP
POWER
1.Connect the Tv via the Scart lead to the DVD player
2.Turn on the Tv
3.Turn on the DVD player at the mains power switch
4.The red led will display that power is applied to the
DVD player
5.Either press the "Power" button on the player or
"Standby" on the R/C
6.This will enable the Tv to switch automatically to AV
and display the DVD "splash screen" on your Tv. If
your tv is of an older type that has not AV switching,
you must select AV manually on your Tv before
turning on the DVD player.
7.When the "Splash screen" is seen, press the Open/Close
button to open the DVD tray.
8.Place a DVD disc into the tray (label side up) and press
the Open/Close button again. (Do not push the DVD tray
to close) this may damage the mechanism.
9.The door will close and the DVD player will read the contents
of the disc and either start to play automatically or show a menu
of the discs contents.
10.To stop playing a disc, press "STOP" and remove the disc
as placing the disc.
11.When finished with the DVD Player, switch off using the Standby
button, the Tv will then revert to its normal operation.
12.If not using the DVD player again it is advisable, environmentally,
to switch the player off at the mains socket, rather than leaving in standby.
Advanced Features
S E T U P
Note:
The Composite video and S-video output is always available.
3. VIDEO
[CVBS+YUV] -Select if you connected the DVD player to your TV
using the YUV(Y,Cb,Cr) output.
[YUV/P-SCAN] - Select if you connected the DVD player to your TV
using progressive scan(Y,Pb,Pr).
[CVBS+S-VIDEO]-Select if you connect the DVD player to your TV using
S-VIDEO output.
* The default setting is CVBS+S-VIDEO.
2. SCREEN SA
VER
If the screen saver is on,when your DVD player is in Stop,Open,or No Disc
state,or there is a frame frozen for more than 180sec,the screen saver will
be displayed.This feature can protect the screen from damage.
[ON] - Choose this setting to activate the screen saver.
[OFF]- Choose the setting to cancel the screen saver.
* The default setting is ON.
[NTSC] -Select if you are using NTSC signal system to match your TV set.
[PAL] -Select if you are using PAL signal system to match your TV set.
[AUTO] -Select this,the DVD player will match the TV set automatically.
* The default setting is AUTO.
1. Select [TV SYSTEM] in the System Setup Menu
to display the [TV SYSTEM] Submenu:
P re s s to s e lect the m e nu i tem
A.P ress <E NT E R > to s et
B .P ress or repeatedly
to return to the S etup Menu
4. TV TYPE
[4:3 PS] -Pan and scan refes to pictures where part of pictures is cut
off so it fills
the whole screen.
[4:3 LB] -Letter Box refers to pictures where black bands appear at
the top and bottom.
[16:9] -The picture fills the screen of a wide-screen(16:9) television.
* The default setting is 4:3PS.
Note: Not all DVDs offer movies in Full Screen format. If not, the disc
will override your TV Display setting and the movie will be
displayed in Letter box format.
Modes a nd F ea ture s S etup
5. PASSWORD
The password option is initialized locked, and you cannot set the ratings
limit or change the password. In order for the Rating feature work, the
password mode must be turned on. If you want to set the ratings limit, you
will need to enter the default password, which is 8888,then press
<ENTER> to confirm. To change the password, you will be prompted for
the old password, then be prompted for a new. Enter a 4-digit number
(this is your password).
9
8
SCREEN
