1 4
3
rd
Item: To adjust the sampling clock of the system for input signal.
4
th
Item: To adjust the sampling phase of the system for input signal.
5
th
Item: To adjust the horizontal place of the picture.
6
th
Item: To adjust the vertical place of the picture.
7
th
Item: To adjust local VGA
color temperature value, which could be ”C9300” or
°
∞
C6500”.
8
th
Item: It is used to carry out Auto Configure, when the screen display is abnormal, in order to get perfect state,
at the same time to store the relevant data calculated by computer into system as customer data.
9
th
Item: To carry out Auto Configure. Besides, it could resume customer data which is stored in the system.
4.
while the VGA in the mode of no menu display, adjust the V+/V-
directly, it displays the volume adjustment menu in the mode of VGA..
P.S.:
1
£Æ
The operation of remote keys and local keys in VGA menu is the same with the former relevant TV operation.
2
£Æ
We do not advise to use 3
rd
£¨
4
th
£¨
5
th
£¨
and 6
th
item to tune screen state. It is better to use 9
th
item.
3
£Æ
If only to carry out Auto Configure, it is better not to use this menu.
7 Television Installation
Connect antenna or video facility
1.
Use 75
¶
∏
coaxial cable plug or 300-75
¶
∏
impedance converter to plug in antenna input terminal on the rear of
the cabinet.
2.
Connect the video facility to the audio, video in jack on the rear of the cabinet.
75
Ω
Co-axis cable
Antenna in jack
75
Ω
Co-axis cable
VHF antenna
Mixer
UHF antenna
Input terminal of antenna
Co-axis antenna plug
