17
Battery installation and replacement for remote control unit
The remote control uses two 1.5V AA batteries. For battery installation and replacement are as following:
1.
Turn the remote control unit upside down. Press
down the grip of battery compartment and slide
the cover in the direction of the arrow.
2.
Install two new batteries, make sure that
battery polarity matches with the “+”, “–”
marks inside the battery. Or it could
damage the unit.
3.
Close the battery compartment covers
8 Trouble Shooting
Before calling the Customer Help Line please carry out these simple tests
Problems
Check
No picture or sound.
Check if the power supply is plugged in.
Check if the power switch is in “on’” position.
Picture is OK, no sound.
Check if the volume control is set to the minimum or mute position.
Remote control doesn’t work. Check if the power switch is in “on” position.
Check if the batteries are worn out or not connected.
Make sure that there is no strong light striking the sensor window
of remote control unit.
Check there are no obstacles between the sensor window and
remote control unit.
No TV signal.
Check if the TV/AV button is set to TV status.
Disposal of used batteries
. Do not break open or throw
in a fire exhausted batteries. Dispose of in a safe manner
Summary of Contents for AHH20LCD
Page 2: ...1...
