Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Instructions for use:
1. Operational environment
-
The maximum operating temperature should not 40°C !
-
The maximum relative humidity should not exceed 90% !
-
The unit should not be operated at altitudes higher than 1,000 metres above sea level
!
-
The unit was developed exclusively for indoor use and not for outdoor use !
2. Commissioning
2.1. Insert the mains plug properly into the socket.
2.2. Position the axial fan so that the airflow flows in the desired direction after switching
on. Please note that the front (exhaust air) of the axial fan is indicated by the thick side
of the handle. (The mains cable is also located at the front so that the cable is as far
away as possible from the rear intake area).
2.3. The axial fan is switched on by a toggle switch (ON/OFF), which is located under the
front of the carrying handle. The toggle switch is operated by pressing it sideways
(left/right).
3. Maintenance, Cleaning & Storage
Please always disconnect the mains plug first and allow the axial fan to drain completely
before carrying out any cleaning activities on your unit !
3.1. maintenance:
A professional should treat the fan shaft with lubricating oil approx. every 1,000 operating
hours to ensure a long service life of the fan.
3.2 Cleaning the housing:
-
Use a soft and damp cloth to clean the outside of the housing.
-
Only use mild cleaning agents to clean your axial fan.
-
Please make sure that no water gets inside your appliance at any time !
3.3 Storage:
-
We recommend that you repack the unit in its original box for storage.
-
Store the unit in a dry and sufficiently ventilated place/space.
