Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Please switch off the unit immediately and disconnect it from the
mains/power supply if anything seems to be wrong !!! In this case, please
contact a specialist and do not try to repair the unit yourself !!!
Examples:
Fan does not run during operation or fuse has blown.
Instructions for use:
1. Operational environment
-
The maximum operating temperature should not 40°C !
-
The maximum relative humidity should not exceed 90% !
-
The unit should not be operated at altitudes higher than 1,000 metres above sea
level !
-
The unit was developed exclusively for indoor use and not for outdoor use !
2. Assembly
In order to be able to put your floor fan into operation, you must first carry out a few
more steps to finally assemble it.
-
Remove both the silver fan head and the frame (with wheels), as well as the two
fastening screws from the packaging.
-
Now place the fan head inside the frame so that
the two side fixing holes of the fan head are level
with the fixing holes of the frame.
-
Place the two washers between the frame and
the fan head and use the two fixing screws
supplied to mount the fan head firmly and
securely to the frame. (See illustration on the
right)
-
Finally, check that everything is firmly mounted
and that the airflow direction can be changed.
