OPERATING INSTRUCTIONS
-3-
INSTALLATION OF WHEELS
1. Take the 4 wheels out of the water tank.
2. Lie down the dehumidifier.
3. Follow the arrow direction on dehumidifier and insert the
wheels to the 4 corners.
4. Place the unit upright, wait 4 hours before use.
Please use both hands to
carefully empty the water tank.
●
Start Operation
1) Place the product in an upright position on a flat, steady, stable, heat-resistant surface.
Make sure there is nothing flammable or heat sensitive within 100 cm (39 inches).
Operating the product in any other position could cause a hazard.
2) Insert the plug into a suitable wall socket. The dehumidifier is suitable
for operation on an electricity supply having the same voltage as that
shown on its rating label.
3) Make sure the water tank is correctly located. (After switching on the
machine for the first time, if the "Bucket Full" lamp illuminates, just
pull out the water tank, check the "float" lever is able to move freely,
then return the water tank to the correct position.)
●
When Bucket Full Lamp Is On
When the water tank is full the machine will stop and the "Bucket Full" light will illuminate.
The water tank should be carefully removed from the machine by sliding it outwards from
the front of the machine and it should be emptied. When the empty tank is replaced
properly into the machine, the machine will start up and run normally.
