Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Instructions for use:
1. Commissioning
1.1. Insert the mains plug properly into the socket.
1.2. Switch the unit on at the main switch to readiness for operation. The unit then signals that it is
ready for operation by lighting up the main switch (see picture on the right) and the operating
light (lights up red).
1.3. By pressing the red operating light, you can switch the operation in the following sequence (circuit):
Level 1 (1,000 Watt heating power)
> Operating light blue
Level 2 (2,000 Watt heating power)
> Operating light blue
Level 3 (No heating power, only LED lamp active)
> Blue operating light
Level 4 (2,000 Watt heating power + LED lamp active)
> Blue operating light
Off (No heating power, LED lamp not active)
> Operating light Red
2. Remote control
2.1. You can also control all settings and functions of your radiant heater with the remote control included in the
delivery. However, the main switch of the radiant heater must be switched on for this purpose. The remote
control requires two AAA (micro) batteries (not included) !
3. Cleaning & Storage
Always unplug the heater from the mains and allow it to cool down completely before cleaning it!
3.1. Cleaning:
-
Use a soft and damp cloth to clean the outside of the housing.
-
Only use mild cleaning agents to clean your radiant heater.
-
Also, make sure that no aggressive cleaning agents are used, they can damage your appliance !
-
Please make sure that no water gets inside your radiant heater at any time !
3.2. Storage:
-
We recommend that you repack the unit in its original box for storage.
-
Store the radiant heater in a dry and sufficiently ventilated place/space.
ON / OFF switch
Heating element 1
(1,000 Watt)
ON / OFF switch
of the LED lamp
ON / OFF switch
Heating element 2
(1,000 Watt)
