BATTERY INSTALLATION
WARNING: To avoid electric shock, disconnect
the test leads from any source of voltage before
removing the battery cover.
Do not operate the instrument with the battery
cover removed
1. Disconnect the test leads from the meter.
2. Open the battery cover by loosening the screw
using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing
the correct polarity.
4. Put the battery cover back in place. Secure with
the two screws.
NOTE: If your meter does not work properly, check
the fuses and battery to make sure that they are still
good and that they are properly inserted.
REPLACING THE FUSES
WARNING: To avoid electric shock, disconnect
the test leads from any source of voltage before
removing the fuse /battery cover.
17
Summary of Contents for AMM-1009
Page 1: ......
