7
www.tmatlantic.com
Cleaning and Maintenance
•
For the best result and a long service life always keep the
soldering tip tinned.
•
Regularly clean dirty soldering tips with a wet soldering
sponge.
•
If the soldering tip has became passive and will not take to
the solder easily, take it out of the soldering iron.
Thoroughly clean it with 600 - 800 grid emery cloth. After
that the tip must be tinned again. Roll some solder with a
flux core around the tip and heat up the tip until the solder
has molten around the tip. Using additional colophony may
be helpful.
•
If the tips are finally worn out, replace them to preserve the
full perform¬ance of the soldering station.
•
Please pull the power plug before cleaning and allow it to
cool down fully!
•
Avoid exerting excessive pressure on the LC display. Use
only a stiff brush and a moist cloth to clean the unit and
allow it to dry out before the next use.
•
Do not use aggressive chemicals or abrasives to clean the
unit.
Visit
www.tmatlantic.com
for more information
